OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0054

Second Row Center Seat Belt Sensor

B0054 is reserved for the buckle sensor of the middle seat in the second row. That position often has its buckle in a split bench or under a fold-down armrest, so the lead runs through moving seat parts. The rear warning required by FMVSS 208 S7.5(c) for vehicles made from September 2028 covers every rear designated seat, the middle one included. Ford's patent for rear belt monitoring counts latched belts once the car passes 3 mph with the doors shut and warns only when that count drops, so a passenger who changes seats is not flagged. The sensor itself is usually a Hall switch that detects the steel tongue in the buckle. No carmaker documents B0054 publicly; Mitsubishi's passenger code B0052 shows how such a buckle fault is set.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 54

Possible causes

  • Lead of the centre buckle strained at the split bench or armrest hinge high
  • Loose or corroded connector of the centre buckle medium
  • Faulty Hall switch in the centre buckle medium

Symptoms

  • Airbag or rear belt warning lamp on
  • Middle rear seat shown wrongly in the belt status display
  • Safety note: buckle plugs under the rear bench lie close to pretensioner wiring; only unplug them with the battery disconnected and the wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0054

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication