OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0052

Passenger Seat Belt Sensor

B0052 concerns the front passenger's buckle sensor, reporting to the airbag module whether the tongue is latched. That signal feeds the passenger belt reminder that FMVSS 208 requires at the front outboard seats and helps the module decide how the passenger airbag and pretensioner fire. Mitsubishi uses the code in exactly this sense: its SRS manual stores B0052 with byte 11, 12, 13, 29 or 2B for a grounded line, short to supply, open circuit, invalid signal or short to another line, each after 2 seconds with the ignition on. FCA parts guidance for its restraint controller in the Dart, Cherokee and Chrysler 200 calls B0052-13 an open passenger belt sensor. GM, by contrast, logs a deployment under B0052 in its 2011 Global A modules. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 52

Possible causes

  • Loose or corroded buckle connector under the passenger seat high
  • Faulty Hall sensor inside the passenger buckle medium
  • Buckle lead pinched or torn by the seat rails or a mat fixing medium
  • Input fault inside the airbag control module low

Symptoms

  • Airbag warning lamp on
  • Passenger belt reminder warns although the belt is fastened, or stays silent
  • Passenger airbag and pretensioner strategy may assume an unbelted occupant
  • Safety note: the buckle plug sits under the seat next to airbag and pretensioner plugs; only unplug it with the battery disconnected and the wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0052

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication