B0051
First Row Center Seat Belt Sensor
B0051 belongs to the buckle sensor of a middle seat in the front row, found in pickups and vans with a front bench for three. FMVSS 208 requires a belt warning only for the outboard front seats, so a centre buckle sensor is extra equipment that feeds the restraint module and, where fitted, a reminder for that place. Typical hardware is a non-contacting Hall buckle switch as offered by CTS and described by Allegro. No carmaker documents B0051 with this meaning; Mitsubishi uses the same J2012 pattern for the passenger buckle, B0052, with an open or invalid signal for 2 seconds. Older GM modules (Saab 9-5 2006, 9-3) store B0051 as Deployment Commanded, a crash record. Airbag lamp on.
Possible causes
- Loose or corroded connector of the centre buckle under the bench seat high
- Faulty Hall switch in the centre buckle medium
- Lead strained by a fold-down centre seat or console low
Symptoms
- Airbag warning lamp on
- Centre seat belt reminder may be wrong or missing
- Safety note: the buckle connector sits under the seat next to the side airbag and pretensioner plugs; disconnect the battery and observe the wait time before unplugging anything
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B0051
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.
Sources
- law.cornell.edu/cfr/text/49/571.208
- ctscorp.com/Products/Automotive-Position-Sensors/occupancy-restraint-sensors
- allegromicro.com/-/media/files/application-notes/an296068-vehicle-safety-systems.pdf
- mitsubishitechinfo.com/data/DG/2022/08/HTML/N5080404A000GN00USA.htm
- saabwisonline.com/9-5-9600/2006/8-body/airbag-srs/fault-diagnosis-diagnostic-trouble-codes/b0051