OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0050

Driver Seat Belt Sensor

B0050 monitors the switch in the driver's belt buckle that tells the restraint module whether the belt is latched; the module uses it for the belt reminder and for choosing the airbag and pretensioner response. Usually a two-wire Hall sensor whose current changes when the steel tongue enters the buckle. FCA documents B0050 with this wording: its 2016-17 parts notes for the Dart, Cherokee and Chrysler 200 list B0050-13 as an open circuit of the driver belt sensor, and TSB 10-001-23 for the 2015-22 Renegade and Fiat 500X lists B0050-13 and B0050-1D (out of range), traced to terminal corrosion at the inline buckle connector under the seat. Mitsubishi uses B0052 for the passenger buckle. The airbag lamp lights.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 50

Possible causes

  • Corroded terminals at the inline connector between buckle and seat harness high
  • Faulty Hall sensor or switch inside the driver buckle medium
  • Buckle lead pinched or stretched by the seat track medium
  • Foreign object or debris in the buckle confusing the sensor low

Symptoms

  • Airbag warning lamp on
  • Belt reminder for the driver may warn wrongly or stay silent
  • Restraint module may treat the driver as unbelted and adapt airbag and pretensioner firing
  • Safety note: the buckle connector sits under the seat next to the side airbag and pretensioner plugs; disconnect the battery and observe the wait time before unplugging anything

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0050

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication