OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B004A

Third Row Right Frontal Stage 2 Deployment Control

B004A is the second-stage loop of the right third-row frontal airbag. Stage 2 is a separately ignited charge: Breed's patent shows an inflator whose chambers each carry their own igniter, fired alone, together or with a delay chosen by the controller, and Mercedes-Benz's rear airbag filing allows one deployment device per chamber for sequential filling. No published DTC table, vehicle maker or bulletin connects B004A to a real vehicle. If it appears, the stage 2 circuit of that bag is out of range while stage 1 (B0049) may still be fine; the left-hand equivalent is B0042. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 4A

Possible causes

  • Open or short only in the stage 2 wiring medium
  • Loose connector in the second-row seatback medium
  • Restraint module configured for equipment the vehicle does not have (wrong part or coding) low

Symptoms

  • Airbag warning lamp on
  • Two-stage inflation for the right third-row seat is lost
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B004A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication