B0048
Third Row Right Side Airbag Deployment Control
B0048 is the right-hand counterpart of B0040: the deployment loop of a side airbag for the right seat in a third row. Few vehicles have one, because the third row usually relies on a curtain that reaches back to the D-pillar. Patent literature covers the hardware: Joyson's seatback side module is described for any seating row including the third, and GM's application treats each rear row as a separate system with its own generator that may stay idle when another fires. No manufacturer documents B0048, and NHTSA holds no bulletin with it. For a second-row right side bag, Mitsubishi shows the usual logic under B0038, a fault confirmed after 2 seconds. Airbag lamp on.
Possible causes
- Poor contact at the third-row right side airbag connector high
- Lead damaged by folding, sliding or removing the third-row seat medium
- Restraint module configured for equipment the vehicle does not have (wrong part or coding) low
Symptoms
- Airbag warning lamp on
- Right third-row occupant may lack side airbag protection
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B0048
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.