OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0047

Left Curtain Deployment Loop Short to Ground

B0047 is missing from the accessible J2012 lists as well, and no vehicle maker or NHTSA bulletin documents it, so it is not publicly traceable. The title names a grounded left curtain airbag loop; this inflatable curtain covers the side windows in side impacts and rollovers. Under J2012 this fault is normally stored as B0021 with byte 11: Mitsubishi sets B0021-11 once the left curtain circuit has been grounded for 2 seconds. GM Global A uses B0016 02 for a grounded left roof rail airbag loop, also after 2 seconds. A grounded lead often sits where the roof harness passes sharp body edges or trim clips. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 47

Possible causes

  • Insulation of the curtain lead chafed through against the body high
  • Lead pinched by a pillar trim or headliner clip medium
  • Internal short to housing in the left curtain airbag low

Symptoms

  • Airbag warning lamp on
  • Left curtain airbag deployment may be blocked
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0047

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication