OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0046

Left Curtain Deployment Loop Open

B0046 appears in none of the accessible J2012 code lists, which jump from B0043 to B0048, and no carmaker or bulletin uses it publicly, so the code cannot be traced to a vehicle. Its title describes an open firing loop of the left curtain airbag that drops from the roof rail. J2012 normally encodes that fault as B0021 with failure type 13: Mitsubishi stores B0021-13 when the left curtain circuit has been open for 2 seconds, and Mercedes-Benz reads B002113 as an open left windowbag squib. GM's Global A modules report the same fault as B0016 04 for the left roof rail airbag. If B0046 is read, trust the text the scan tool shows. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 46

Possible causes

  • Unplugged or loose curtain airbag connector at the pillar or roof rail high
  • Broken lead in the roof rail harness, e.g. after headliner work medium
  • Open igniter inside the left curtain airbag low

Symptoms

  • Airbag warning lamp on
  • Left curtain airbag may not deploy in a side impact or rollover
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0046

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication