OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0043

Third Row Left Frontal Stage 3 Deployment Control

B0043 completes the left third-row frontal group as its stage 3 element. By analogy with front airbags this can be a vent valve squib, as Mercedes-Benz uses for B000313 and B001213, or a further gas chamber like the third chamber in Breed's patent that is kept for a second collision. No public source ties B0043 to a third-row bag. GM gives the number a separate, documented meaning in its older modules: the Saab 9-5 of 2006 stores B0043 if the driver stage 2 terminal sits above 4.1 V or under 1.0 V for 2 seconds, and the 9-3 splits it into shorts to supply, to ground or to another firing loop. Check which airbag the scan tool names. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 43

Possible causes

  • Damaged stage 3 lead or squib medium
  • Short between two firing loops in a shared harness low
  • Restraint module configured for equipment the vehicle does not have (wrong part or coding) low

Symptoms

  • Airbag warning lamp on
  • Third deployment element of this airbag is disabled
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0043

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication