B0042
Third Row Left Frontal Stage 2 Deployment Control
B0042 stands for the second stage of a frontal airbag aimed at the left third-row passenger. A second stage only makes sense with an inflator that has two independently fired charges, as in Breed's multi-chamber design where the controller picks which chamber fires first and the gap between them. No carmaker documents B0042 for the third row, and no series car with such a bag is known. The older GM meaning is clear-cut: Saab's 9-5 (2006) and 9-3 manuals define B0042 as driver frontal stage 2 loop resistance below 1.5 ohms lasting 2 seconds, and the GM CPA retainer bulletin 08-09-41-002H covers it too. Airbag lamp on.
Possible causes
- Open or short only in the stage 2 wiring medium
- Connector lock not engaged at the airbag plug medium
- Restraint module configured for equipment the vehicle does not have (wrong part or coding) low
Symptoms
- Airbag warning lamp on
- Adaptive two-stage inflation for this seat is unavailable
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B0042
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.