OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0041

Third Row Left Frontal Stage 1 Deployment Control

B0041 would report the first stage of a frontal airbag for the left third-row seat, which would have to deploy from the back of the second-row seat in front of it. Such bags are described in patents, for instance a Daimler application for an airbag at the rear of a front seat and a Mercedes-Benz filing that compensates for a sliding seat with stacked chambers, but no production vehicle with third-row frontal airbags is known; the S-Class rear airbag serves the second row only. No maker documents B0041. GM's old numbering is unrelated: for the Saab 9-5 of 2006 B0041 means an open driver side airbag loop, read as more than 4.5 ohms over 2 seconds. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 41

Possible causes

  • Loose connector of the airbag lead in the second-row seatback medium
  • Lead strained when the second-row seat is folded or slid medium
  • Restraint module configured for equipment the vehicle does not have (wrong part or coding) low

Symptoms

  • Airbag warning lamp on
  • Frontal airbag for the left third-row seat may not deploy
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0041

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication