B003B
Second Row Right Frontal Stage 3 Deployment Control
B003B is the third firing element of the right rear-seat frontal airbag. In front airbags Mercedes-Benz uses this third position for the squib that opens a vent valve and lets gas escape (B000313 driver, B001213 passenger); a patent from Breed shows the other option, a third gas chamber with its own igniter that the controller can fire later, for example in a second impact. Which of these a rear bag would use is not published, and no carmaker documents B003B. If it is stored, the module has found the third element out of range in resistance or voltage. Stage 1 and 2 of the same bag report as B0039 and B003A. The airbag lamp stays on.
Possible causes
- Damaged stage 3 lead or vent squib in the right rear airbag medium
- Loose or corroded connector of the airbag lead routed through the front seat backrest high
- Restraint module configured for equipment the vehicle does not have (wrong part or coding) low
Symptoms
- Airbag warning lamp on
- Right rear airbag may deploy without its adaptive third stage
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B003B
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.