B0036
Right Side Deployment Stage 2 Loop Short to Ground
B0036 appears neither in the public J2012 lists nor in any accessible manufacturer document, so the code is not publicly verifiable. Its title describes a short to ground in a second stage of the right side airbag. How restraint modules handle such a fault is known from other codes: Mitsubishi stores B0028-11 when the right front side airbag circuit has been grounded for 2 seconds, and the GM manual for the Saab 9-4X sets byte 02 on the passenger seat side airbag code B0021 after a ground short of the same length. GM adds that a badly seated connector lock can let the shorting bars bridge both firing leads, so connectors are checked first with byte 02. Two-stage side airbags are uncommon. Airbag lamp on; the bag may not deploy.
Possible causes
- Chafed side airbag lead touching the seat frame or body high
- Connector lock not engaged, shorting bars bridge the loop medium
- Internal short in the side airbag module low
Symptoms
- Airbag warning lamp on
- Right side airbag may not deploy in a side impact
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B0036
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.