OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0034

Right Side Deployment Stage 2 Control

B0034 is absent from the J2012 lists, which skip from B0033 to B0038 in the second-row block, and no carmaker or bulletin documents it publicly; the code cannot be traced to a real vehicle. The title describes a second firing stage for the right side airbag. Such bags are rare: Ford's far-side impact patent treats thorax, pelvis and head bags as single-setting because of their size, while Autoliv covers chest and pelvis with a two-chamber bag, not with two firing stages. Right front side airbags carry the J2012 code B0028; Mitsubishi, for example, checks that loop for 2 seconds before storing a fault. If B0034 is read, the module and text shown by the scan tool are what count. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 34

Possible causes

  • Fault in the squib loop the module assigns to this code medium
  • Poor contact or corrosion at the side airbag connector or jumper harness under or in the seat high
  • Fault or unsuitable software in the restraint control module low

Symptoms

  • Airbag warning lamp on
  • Right side airbag protection may be reduced
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0034

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 2 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication