OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0033

Second Row Left Frontal Stage 3 Deployment Control

B0033 is the third deployment element of a frontal airbag for the left second-row seat. A third igniter can be a further gas chamber; a Breed patent describes an inflator with one igniter per chamber whose firing order and 0 to 25 ms delays the controller chooses. Mercedes-Benz fills the stage 3 slot of its front bags with the vent valve squib (B000313, B001213), a model for what stage 3 may mean behind a seat. No carmaker documents B0033 for a rear bag. GM bulletin 08-09-41-002H names B0033 with bytes 04, 0D and 0E in its CPA retainer bulletin for numerous GM cars and trucks of 2005 to 2014, where the number belongs to another GM loop. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 33

Possible causes

  • Connector position assurance lock missing or not seated, so the plug works loose high
  • Damaged stage 3 lead or igniter in the rear airbag medium
  • Restraint module configured for equipment the vehicle does not have (wrong part or coding) low

Symptoms

  • Airbag warning lamp on
  • Adaptive inflation of the left rear airbag is lost
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0033

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication