B0032
Second Row Left Frontal Stage 2 Deployment Control
B0032 concerns a second igniter for the rear-seat frontal airbag on the left. A second stage lets the module add gas later or skip it, depending on crash severity and on who sits behind the seat; a Mercedes-Benz filing for a backrest-mounted rear airbag allows separate deployment devices for its chambers so they can fire in sequence. In that car the rear bag's tube frame is filled with compressed gas while its centre takes in outside air. No published DTC table assigns B0032 to this use. GM's Global A modules give the number to the left rear belt pretensioner: the Saab 9-4X 2011 sets it after 2 seconds of a short, an open, above 4.2 ohms or below 1.4 ohms. Airbag lamp on.
Possible causes
- Open or short only in the stage 2 pair of wires to the rear airbag medium
- Loose or corroded connector of the airbag lead routed through the front seat backrest high
- Faulty second igniter inside the rear-seat airbag module medium
- Restraint module configured for equipment the vehicle does not have (wrong part or coding) low
Symptoms
- Airbag warning lamp on
- Rear-seat airbag may inflate with less force or not at all
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B0032
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.