OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0031

Second Row Left Frontal Stage 1 Deployment Control

B0031 points to the first firing stage of a frontal airbag that protects the left rear passenger, so it can only be stored where such a bag exists. The known production case is Mercedes-Benz's S-Class of 2020: an optional rear airbag (standard on the Maybach) unfolds from the back of the front seat for the two outer rear seats, built as a gas-filled tube frame that draws ambient air into its cushion. No carmaker publishes B0031 with this meaning. GM used the number differently: the Saab 9-4X 2011 manual groups B0031 with its front seat side airbag codes. Stage 2 and 3 of the same bag follow as B0032 and B0033. The airbag lamp lights and the rear bag may not fire in a frontal crash.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 31

Possible causes

  • Loose or corroded connector of the airbag lead routed through the front seat backrest high
  • Internal fault in the rear-seat airbag module in the front seatback medium
  • Lead stretched or pinched by the seat track or folding mechanism medium
  • Restraint module configured for equipment the vehicle does not have (wrong part or coding) low

Symptoms

  • Airbag warning lamp on
  • Left rear passenger may lose frontal airbag protection in a crash
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0031

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication