OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0030

Second Row Left Side Airbag Deployment Control

In J2012 the B003x block covers the second seat row, and B0030 is the left rear side airbag, mounted in the rear door or the outer backrest. Mitsubishi files B0030 under the rear side airbag module LH and sets a short to another circuit after 2 seconds. Mercedes-Benz reads B003013 as an open squib in the left rear sidebag on the A-Class, CLA and GLB, often caused by higher contact resistance at the restraint unit connector (LI54.21-P-070658). The older GM numbering differs: on the 2006 Saab 9-5, B0030 is a passenger side airbag loop whose pin voltage is above 4.1 or below 1.0 volts for 2 seconds, and the Saab 9-3 reads it as a passenger side bag short. The right-hand rear twin is B0038. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 30

Possible causes

  • Raised contact resistance at the restraint module or rear side airbag connector high
  • Damaged lead in the rear door transition or rear seat backrest medium
  • Internal fault in the rear left side airbag module low

Symptoms

  • Airbag warning lamp on
  • Rear left side airbag may not deploy in a side impact
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0030

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication