OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B002A

Right Curtain Deployment Control 2

B002A is the second firing loop of the right curtain airbag, needed only where the right side has two curtain inflators or a separate curtain section for the rear seats. Mercedes-Benz uses it that way on the A-Class, CLA and GLB: B002A13 marks an open squib in the right rear window bag, while the front part reports B0029; a known trigger was poor contact at the control unit plug (LI54.21-P-070658). A TRW and Ford patent describes front-row and rear-row curtains that inflate separately and may be tethered together at the B-pillar. Where curtains also deploy in a rollover, FMVSS 226 requires a readiness indicator the driver can see. Airbag lamp on; head protection for the right rear seat may be missing.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 2A

Possible causes

  • Raised contact resistance at the restraint module connector (Mercedes LI54.21-P-070658) high
  • Damaged lead to the rear curtain section at the C-pillar or roof rail medium
  • Internal fault in the rear right curtain airbag module low

Symptoms

  • Airbag warning lamp on
  • Head protection for the right rear seat may be missing
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B002A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication