OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0029

Right Curtain Deployment Control 1

B0029 stands for the first firing loop of the right curtain airbag. FCA's STAR case S2010000001 for the 2019 Ram heavy-duty pickup reads B0029-11 as a ground short in right curtain squib 1 and sends the technician to the wiring at the C-pillar trim fixings. Mitsubishi lists the right curtain module under B0029 and sets the ground short after 2 seconds. On the A-Class, CLA and GLB Mercedes-Benz stores B002913 for an open squib of the right window bag. Older GM modules used the number for the passenger side airbag: the 2006 Saab 9-5 sets it when resistance stays above 4.5 ohms for 2 seconds. B002A is the second right curtain loop. Airbag lamp on; the curtain may not deploy in a side impact or rollover.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 29

Possible causes

  • Lead pinched or chafed at pillar trim fixings (FCA S2010000001) high
  • Raised contact resistance at the curtain or restraint module connector medium
  • Internal fault in the right curtain airbag module low

Symptoms

  • Airbag warning lamp on
  • Right curtain airbag may not deploy in a side impact or rollover
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0029

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication