OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0028

Right Side Airbag Deployment Control

B0028 is the right-hand twin of B0020: the firing loop of the right front side airbag, normally in the outer flank of the passenger seat. Honda asked for parts from 2018-20 Accord and CR-V and from the 2015 TLX that stored B0028-13, an open or raised resistance in the passenger side airbag inflator. FCA traces B0028-13 on the Cherokee and Chrysler 200 to the jumper harness in the seat, and Toyota's 2022 Tundra stored B002811 or B002812 because the wireless phone charger disturbed the module. Mitsubishi confirms a short to ground after 2 seconds. The older GM numbering differs: the 2006 Saab 9-5 and the 9-3 used B0028 for low resistance in the passenger side bag loop, under 1.5 ohms. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 28

Possible causes

  • Poor contact or corrosion at the side airbag connector or jumper harness under or in the seat high
  • Internal fault in the right seat side airbag inflator medium
  • Lead pinched or stretched by seat adjustment medium
  • Restraint module software reacting to interference (Toyota Tundra 2022) low

Symptoms

  • Airbag warning lamp on
  • Right front side airbag may not deploy in a side impact
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0028

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication