B0025
Left Side Deployment Stage 2 Control
No public J2012 code list contains B0025, and no manufacturer publicly describes a second stage of a left side airbag under this number. The only trace is at General Motors: the Saab 9-4X 2011 manual groups B0025 with the roof rail airbag codes B0016 and B0023 but gives no descriptor for it. Two-stage side airbags are rare in any case. A Ford patent notes that thorax, pelvis and head bags usually have a single inflation setting because of their small size, and the dual-chamber side airbag described by Autoliv divides one cushion into chest and pelvis zones rather than firing twice. If B0025 appears, the descriptor and module name on the scan tool decide what is meant. Airbag lamp on; the affected bag may not deploy.
Possible causes
- Open, shorted or high-resistance squib loop of the airbag the module assigns to this code medium
- Connector or its position lock not fully engaged medium
- Fault or unsuitable software in the restraint control module low
Symptoms
- Airbag warning lamp on
- Side or curtain protection may be reduced on the affected side
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B0025
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 2 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.