OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0024

Right Side Deployment Control

B0024 is missing from the public J2012 lists; there the right front side airbag is B0028. General Motors used the number twice. Older modules, such as those of the 2006 Saab 9-5 and the Saab 9-3, assign it to driver frontal stage 1: on the 9-5 the voltage at the module pin leaves the 1.0 to 4.1 volt window for 2 seconds, on the 9-3 the loop is shorted to ground or battery. In 2021 GM listed B0024 01 beside B0017 01 and B001E 01 on Cadillac XT4 to XT6, Blazer, Camaro, Malibu and Acadia as a software fault of the sensing module, pointing to the knee bag and the inboard side bag of the driver seat; new SDM software fixes it (PIT5827, 21-NA-176). A right side airbag meaning is not publicly documented. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 24

Possible causes

  • Restraint module software fault on 2021 GM models (PIT5827, 21-NA-176) high
  • Short to ground or battery in the driver frontal stage 1 loop (older GM/Saab) medium
  • Worn clock spring in the driver airbag loop (older GM/Saab) medium

Symptoms

  • Airbag warning lamp on
  • Depending on the vehicle, the driver airbag or a seat side airbag may be affected
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0024

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication