OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0023

Left Side Deployment Stage 1 Loop Short to Ground

B0023 does not appear in the J2012 code lists, which jump from B0022 to B0028, and no carmaker documents it as a ground short of a left side airbag stage. It is documented at General Motors with another meaning: in the Saab 9-4X 2011 manual B0023 is the right roof rail (curtain) airbag loop, with bytes for short to battery (01), short to ground (02), open (04) and resistance above 4.2 or below 1.4 ohms (0D, 0E), each confirmed after 2 seconds. GM bulletin 08-09-41-002H lists B0023 among codes caused by unseated connector position locks on many 2005-14 models. A real ground short in a squib loop can stop deployment, so first read which module and descriptor the scan tool reports. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 23

Possible causes

  • Connector position assurance not engaged, so shorting bars bridge the loop (GM 08-09-41-002H) high
  • Chafed lead touching body ground medium
  • Internal fault in the affected airbag module low

Symptoms

  • Airbag warning lamp on
  • The airbag on the affected loop may not deploy
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0023

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication