OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0022

Left Curtain Deployment Control 2

B0022 belongs to a second firing loop for the left curtain airbag. Mercedes-Benz shows what that means in practice: on the A-Class, CLA and GLB, B002213 is an open squib in the left rear window bag, the curtain section for the rear seats, while B0021 serves the front one (LI54.21-P-070658, version 1 of 2019 and version 4 of 2020). Cars with a single curtain inflator never set it. General Motors has older meanings for the number: the 2006 Saab 9-5 used it for driver frontal stage 1 resistance below 2.0 ohms, and Global A modules for the passenger belt retractor pretensioner, as on the 2009-11 Impala (PIC5396A) or the Saab 9-4X. The module and descriptor shown by the scan tool decide which part is meant. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 22

Possible causes

  • Raised contact resistance at the restraint module connector (Mercedes LI54.21-P-070658) high
  • Damaged lead to the rear curtain section at the C-pillar or roof rail medium
  • Internal fault in the rear left curtain airbag module low
  • Fault or unsuitable software in the restraint control module low

Symptoms

  • Airbag warning lamp on
  • Head protection for the left rear seat may be missing
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0022

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication