OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0021

Left Curtain Deployment Control 1

In the J2012 order B0021 is the first firing loop of the left curtain airbag, the bag that drops from the roof rail over the side windows. Mitsubishi files it under the left curtain module and stores byte 11, 12, 13 or a short to another circuit once the condition has lasted 2 seconds. Mercedes-Benz reads B002113 as an open squib of the left window bag on the A-Class, CLA and GLB, where raised contact resistance at the restraint unit plug was the cause (LI54.21-P-070658). Curtain 1 is the only or front curtain inflator; B0022 is the second one. GM Global A modules use B0021 for the passenger seat side airbag instead, with bulletins on seat harness contact (PI1469, 23-NA-030). Airbag lamp on; the left curtain may not fire.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 21

Possible causes

  • Raised contact resistance at the curtain airbag or restraint module connector high
  • Damaged lead along the A-, B- or C-pillar or the roof rail medium
  • Internal fault in the left curtain airbag module medium
  • Fault or unsuitable software in the restraint control module low

Symptoms

  • Airbag warning lamp on
  • Left curtain airbag may not deploy in a side impact or rollover
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0021

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication