OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B001A

Center Frontal Stage 3 Deployment Control

B001A closes the first-row center frontal series and stands for a third stage of a middle-seat frontal airbag, matching B0003 for the driver and B0012 for the passenger. No carmaker documents it publicly in this sense. At General Motors the number belongs to the anchor-mounted belt pretensioner on the driver side, a second pretensioner at the belt end fitting that works next to the retractor unit coded B0015. Its limits match the other GM squib loops: a pretensioner loop reading beyond 4.2 ohms or beneath 1.4 ohms for two seconds sets the code, as do shorts and opens. GM bulletins report it on the 2009-11 Impala with a pinched or misrouted pretensioner harness (PIC5396A, 15-NA-074) and on Equinox and Traverse 2018 (PIE0438). On GM vehicles look at the lower belt anchor first. The airbag lamp is on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 1A

Possible causes

  • On GM vehicles pinched, misrouted or corroded anchor pretensioner harness high
  • Fault in the third stage loop of a first-row center frontal airbag (J2012 meaning) low
  • Internal fault in the pretensioner low

Symptoms

  • Airbag warning lamp on
  • On GM the driver anchor pretensioner may not fire
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B001A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication