OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0017

Right Front/Passenger Frontal Deployment Loop Short to Battery

None of the public J2012 lists contains B0017 either. In older GM modules (Saab 9-5 2006, Saab 9-3 up to 2011) it marks an open passenger frontal stage 1 loop, set once the loop reads more than roughly 4.5 ohms for two seconds, so the component matches the title but the fault type does not. Later GM vehicles use B0017 with GM's usual fault bytes, where 01 stands for short to battery. On the 2020-22 Acadia, XT4 and related models GM traced B0017 01, together with B0024 01 and B001E 01, to faulty SDM software rather than wiring: the code is cleared and the module reprogrammed (PIT5827, 21-NA-176). The parts named there are the knee airbag and the driver seat inboard side airbag. The airbag lamp is lit.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 17

Possible causes

  • On GM 2020-22 models faulty SDM software, cured by reprogramming (21-NA-176) high
  • Open passenger frontal stage 1 loop (older GM meaning) medium
  • Squib lead in contact with a powered wire low

Symptoms

  • Airbag warning lamp on or an OnStar SIR notification without lamp
  • Affected airbag stage may be disabled
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0017

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication