OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0011

Passenger Frontal Stage 2 Deployment Control

B0011 is the passenger counterpart of B0002: it concerns the second inflator stage of the dashboard airbag, which the module adds in severe crashes or fires with a delay. Mercedes-Benz logs B001113 for an open stage 2 squib of the front passenger airbag, and Mitsubishi lists B0011 as passenger airbag module 2. Stage 1 of the same bag has its own code B0010, a third element B0012. Since both stages leave the module through one connector, a code for stage 2 alone usually means a fault in the stage 2 pins, lead or squib rather than a general connector problem. Older GM modules (Saab 9-3 up to 2011) put passenger stage 2 faults under B0012 to B0014 instead. The airbag lamp is on and adaptive inflation for the passenger is lost.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 11

Possible causes

  • Poor contact on the stage 2 pins or open stage 2 lead high
  • Stage 2 squib in the passenger airbag module faulty medium
  • Output stage in the restraint control module faulty low

Symptoms

  • Airbag warning lamp on
  • Passenger airbag loses its second stage for severe crashes
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0011

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication