OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0010

Passenger Frontal Stage 1 Deployment Control

The front passenger airbag in the dashboard is normally dual-stage like the driver bag, but it also depends on occupant detection: FMVSS 208 allows it to be suppressed for small occupants and requires a readiness indicator that monitors the system. B0010 reports a fault in the firing loop of its first stage. Mercedes-Benz stores B001013 when the stage 1 squib of the passenger bag is open; Mitsubishi files B0010 under the passenger (assist) airbag module with several fault bytes. A suppressed airbag is not a fault and does not set this code; B0010 means the wiring or squib of stage 1 is electrically out of range. Typical spots are the connector behind the dash panel and harness routed past the glovebox. The passenger bag may not deploy and the airbag lamp stays lit.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 10

Possible causes

  • Loose, corroded or unlocked connector at the passenger airbag module high
  • Harness damaged during dashboard or glovebox work medium
  • Internal fault in the passenger airbag module (stage 1 squib) low

Symptoms

  • Airbag warning lamp on
  • Front passenger airbag may not deploy in a crash
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0010

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication