OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0006

Driver Frontal Deployment Loop Short to Ground

B0006 is missing from the public J2012 code lists, which go straight from B0005 to B0010. The only documented use found has nothing to do with airbags: on the 2025 Ram 1500 the body control module stores B0006-11 for a short to ground in the latch control of the left RamBox stowage lid, fixed by a module update (flash 08-204-24). The title describes a driver airbag firing loop shorted to ground. Current restraint modules report that as a fault byte on the stage code instead, for example GM B0012 02 on the 2011 Saab 9-4X, set after two seconds of ground short. A ground short in a squib circuit can stop the stage from firing, so the scan tool must first show which module stored B0006 before anyone works on the airbag.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 06

Possible causes

  • On Ram 1500 2025 the code belongs to the left stowage lid latch circuit of the body module, not the airbag medium
  • Driver airbag squib lead chafed against metal (ground short) medium
  • Insulation damage inside the clock spring low

Symptoms

  • Airbag warning lamp on when stored by the restraint module
  • On Ram 1500 2025 stowage lid will not open electrically, alarm may sound
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0006

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication