OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0005

Collapsible Steering Column Deployment Control

Some steering columns can change how much energy they soak up while collapsing in a frontal crash. In a Delphi/Nexteer patent a controller fires pyrotechnic actuators that force an absorber strap into a tighter path or couple in extra absorbers, matching the column to driver size and crash severity. B0005 is the restraint module code for the firing loop of such an actuator. Land Rover documents B0005-56, an invalid or incompatible configuration, on the Evoque from 2018 when a replacement restraints control module had received older software than the factory level; a manual patch of the diagnostic equipment fixes it (SSM 74577). FMVSS 204 caps rearward column travel at 127 mm when the car hits a barrier at 48 km/h. With the loop faulted, the column keeps its fixed default behaviour and the airbag lamp is on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 05

Possible causes

  • Restraint module configuration or software does not match the vehicle (Land Rover SSM 74577) high
  • Open or shorted lead to the pyrotechnic column actuator medium
  • Faulty actuator in the steering column low

Symptoms

  • Airbag warning lamp on
  • Adaptive energy absorption of the column unavailable, no effect on normal steering
  • Safety note: the column actuator is pyrotechnic; leave tests and connector work to a workshop with the battery disconnected

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0005

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication