OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0004

Driver Knee Bolster Deployment Control

A knee airbag, also called an active knee bolster, sits in the lower dash below the steering column. It fills the space in front of the driver's knees and holds the lower body back in a frontal crash, mainly for unbelted occupants. B0004 reports a fault in its firing loop. Mercedes-Benz stores B000413 for an open squib of the driver kneebag. Ford lists B0004:1A with the passenger knee code B0013 on the 2024 Ranger and traces it to certain airbag connectors, recognisable by a number moulded into the connector lock (TSB 24-2444). In an IIHS study of more than 400 crash tests, knee airbags brought only a small benefit for belted dummies. Still, the restraint module counts the loop as part of the system, and the airbag lamp stays on until the circuit is repaired.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 04

Possible causes

  • Faulty or loose knee airbag connector under the dash (Ford TSB 24-2444) high
  • Harness pinched or damaged during work below the steering column medium
  • Internal fault in the knee airbag module low

Symptoms

  • Airbag warning lamp on
  • Driver knee airbag may not deploy in a frontal crash
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0004

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication