OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0003

Driver Frontal Stage 3 Deployment Control

Some driver airbag modules carry a third pyrotechnic element in addition to the two inflator stages, and B0003 covers its firing loop. FCA lists the code as driver frontal squib 3; its STAR case S2108000180 found B0003-2B (wires shorted together) next to B0001 and B0002 when connector locks behind the steering wheel were not engaged. Mercedes-Benz uses B000313 for the squib of the vent valve inside the driver airbag, which lets gas escape so the cushion becomes softer. An FCA patent describes such an active vent that the airbag electronics opens or keeps closed using data from occupant classification. With this loop faulted, the bag loses its third stage or adaptive venting, while the two inflator stages may still work. The airbag lamp lights up.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 03

Possible causes

  • Connector position assurance lock at the airbag module not engaged high
  • Third squib or vent valve squib in the airbag module faulty medium
  • Damaged clock spring conductor for the third circuit low

Symptoms

  • Airbag warning lamp on, often together with B0001 or B0002
  • Adaptive venting or third deployment stage unavailable
  • Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0003

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication