B0002
Driver Frontal Stage 2 Deployment Control
Dual-stage driver airbags hold a second charge that the restraint module fires only in severe crashes or after a short delay, so the cushion fills harder or for longer; a Nissan patent bases that choice on the change in vehicle speed and belt use. B0002 flags a fault in the firing loop of this second stage. Land Rover documents B0002-13 as an open stage 2 circuit on the Evoque, which also appeared after a module replacement had loaded older software (SSM 74577). Mercedes-Benz, Mitsubishi and FCA list it as the driver squib or module 2, GM as stage 2 of the steering wheel module. Because both stages share connector and clock spring, B0002 often comes together with B0001; alone it points to the stage 2 lead or squib. Adaptive inflation is lost and the airbag lamp is on.
Possible causes
- Open stage 2 squib lead at the airbag module connector high
- Stage 2 track in the clock spring broken medium
- Replacement restraint module loaded with unsuitable software (Land Rover SSM 74577) low
Symptoms
- Airbag warning lamp on
- Driver airbag loses its second, high-severity stage
- Safety note: do not probe the airbag circuit yourself; unplug airbag connectors only with the battery disconnected and the stated wait time observed
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B0002
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 4 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.